Product Details:
Minimum Order Quantity | 1 Piece |
Port Size | 1/2 inch |
Pressure Range | 10 bar |
Size | 1/2" |
Weight | 2 kg |
I Deal In | New Only |
A FRL injects an aerosolized stream of oil into an air line to provide lubrication to the internal working parts of pneumatic tools, and to other devices such as actuating cylinders, valves and motors. Compressed air enters the inlet port and passes over a needle valve orifice attached to a pick-up tube. This tube - often equipped with a sintered bronze filter - is submerged into a reservoir bowl filled with light machine oil. Oil is pulled up by the venturi effect, and emitted as an aerosol at the outlet port. The needle valve is typically situated within a clear polycarbonate housing to aid in oil flow rate adjustment. A lubricator should always be the last element in an FRL (Filter-Regulator-Lubricator) unit. If an FRL is connected "backwards" with incoming air connected to the lubricator, oil-laden air interferes with pressure regulator operation, oil is separated from the air stream and drained by the filter, and very little or none is delivered to connected equipment.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Port Size | 1/2 inch |
Brand | airtac |
Pressure Range | 10 bar |
Combination Equipment | FRL |
Operating Pressure | 10 kg |
Size | 1/2" F |
Weight | 1.2 kg |
I Deal In | New Only |
A Pneumatic FRL injects an aerosolized stream of oil into an air line to provide lubrication to the internal working parts of pneumatic tools, and to other devices such as actuating cylinders, valves and motors. Compressed air enters the inlet port and passes over a needle valve orifice attached to a pick-up tube. This tube - often equipped with a sintered bronze filter - is submerged into a reservoir bowl filled with light machine oil. Oil is pulled up by the venturi effect, and emitted as an aerosol at the outlet port. The needle valve is typically situated within a clear polycarbonate housing to aid in oil flow rate adjustment. A lubricator should always be the last element in an FRL (Filter-Regulator-Lubricator) unit. If an FRL is connected "backwards" with incoming air connected to the lubricator, oil-laden air interferes with pressure regulator operation, oil is separated from the air stream and drained by the filter, and very little or none is delivered to connected equipment.
Additional Information:
Product Details:
Air Pressure (psi) | 70 - 100 psi |
Nozzle Size (mm) | 2 mm |
Brand | Amy |
Air Consumption (cfm) | 6 to 7 |
Air Inlet (NPT) | 1/4 |
Warranty | 6 months |
Color | Blue |
Condition | New |
Air Blow Gun 1/4" is no more a complicated job but convenient, simple and enjoyable. The Air Blow Gun can be used for blowing away dirt, dust and chips on compressed-air lines, moisture out of joints, crevices before painting and cleaning gasoline and oil lines.
It can also be used to remove shavings from machines, cleaning moulds on plastic presses, foundries and for numerous other uses.
Features
Applications
It is ideal for use in machine shops, plastic moulding industry, foundries and vehicle body shops.
Tags:
Product Details:
Valve Size | 1/2" Female Thared |
Operating Pressure | 10 bar |
Material | Aluminium |
Media | Air |
Drain Time | 0.5 to 10 Sec. Adjustable |
Input Voltage | Coil Volt 110v,24v,12vAC/DC |
Weight | 700 Grm |
Working Pressure | 10 Kg/cm2 |
Temperature | 20 to 85 DegreeC |
Automation Grade | Automatic |
I Deal In | New Only |
Product Details:
Automation Grade | Semi-Automatic |
Operating Pressure | 8bar |
Color | RED |
Power Supply | Single Phase |
Motor Power(kw) | 1.1KW |
Brand | ATS-ELGI LIMITED |
Internal Rim Clamping | 12 - 21 inch |
Bead Breaker Tire Width | 3 - 12 inch |
Maximum Tire Diameter | 38 inch |
External Rim Clamping | 10 - 18 inch |
Product Details:
Minimum Order Quantity | 1 Piece |
Size/Diameter | 1/2 inch |
Type | Pneumatic Hose Pipe |
Size | 1/2 inch |
Color | Blue |
Single Hose Length | 8*12 MM, 6m-12m |
Brand | Hi-tech |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Reel length | ALL |
Brand | Hi-tech |
Usage/Application | air |
Material | Polyurethane(PU) |
Hose Color | Red, Blue |
Hose Size | 1/2 inch, 3/4 inch |
Drum Diameter | ALL |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Cast Iron |
Pressure | 10 kg |
Weight | 2.5 kgs |
I Deal In | New Only |
Additional Information: